The Cloupor t8 is a great device for every user of electronic Cigarette whether you want a small amount of vapor or a lot of vapor this works. The cloupor ranges in wattage from 7 watts to 150 watts of power. When using atomizers that are not sub ohm, which means below an ohm resistance, it’s recommended to stay under 12 watts, for the sub ohm atomizers you can run these devices at ranges of 15- 30 watts. For those who decide to use rebuildable atomizers, your able to use the full range of this device from 7-150 watts, although most people use it from 40-150 watts.
The very important aspect to remember is when using rebuildables you must check what resistance your atomizer is built to because being a regulated device with a chip in it its limited to a minimum of .15 ohms and a maximum of 4 ohms. If you decide to try your devices potential and go lower do it with caution sometimes it’s fine, but most of the times it can’t handle it and will tell you too hot or actually get really hot and at that point you want to take the batteries out and let it cool off and change your atomizer build. This device is also customizable as well with some exclusive features that some other devices don’t offer.
The display OLED screen can be plugged into the computer and customized to your liking and it shows the temperature of the inner board so you know when it’s over heating or getting close to it. This device uses dual 18650 batteries and for safety purposes, generally we at Nikkis Vapor Bar, recommend Samsung 25r batteries, which are rated as most safe, long lasting, and lowest voltage drop.
Although this device comes with an micro USB insert, it unfortunately doesn’t charge through it but if you plug it in to your computer you can access the device internally. All around this device is meant for any Vaper looking for a device for all tanks, atomizers and clearomizers.